The actuator is activated by a mechanical arm that is usually driven by an electric motor that is controlled by an automatic controller that is programmed between the microcontroller. Actuators are elements that convert analog electrical quantities into other quantities such as speed and electromagnetic devices that produce kinetic energy so that they can produce motion in robots. Additionally, if you’ve got damaged ball screws that you want to reuse for your robot assembly facility, we recommend you to bring them to the best superior ball screw repair service instead of replacing them to save production cost.
The actuator control system serves to strengthen the control signal coming from the controller into a new signal with large power and in accordance with the power needed.
Mechanical equipment to drive or control a system. The actuator is activated by a mechanical arm that is usually driven by an electric motor that is controlled by an automatic controller that is programmed between the microcontroller. Actuators are elements that convert analog electrical quantities into other quantities, such as speed and electromagnetic devices that produce kinetic energy so that they can produce motion in robots.
To increase mechanical power this actuator can be installed on a transmission system that can be installed. Actors can do certain things after receiving commands from the controller. For example, if the light is present in a light search robot, the sensor provides information to the controller which then controls that the actuator is moving towards the light source.
In addition, you also need to know the advantages and disadvantages of the actuator, such as:
Advantages:
Hydraulic fluid can function as a lubricant and as a coolant.
With a small size, the power/torque produced is large.
It has a high reaction speed.
It can be operated intermittently.
Low leakage rate.
Flexible in design.
Deficiency:
Hydraulic power is not available compared to electric power.
System costs are more expensive.
There is a risk of fire and explosion.
Systems tend to be dirty.
It has low attenuation properties.
